New wood debarker with a high degree of automation, simple and safe operation, occupies an area of less, saving labor and other superior features. Using large-diameter solid axles, with deep straight pattern, wood spinning long after skidding, speed up the skin's characteristics. Different varieties, different diameters, with different moisture contents of wood is somewhat different from that in the actual operation. What to do in order to achieve the best results it is best.
1. increase the single and double roll diameter, improve the speed of play. Single-and dual-roller chrome plated to improve wear resistance of roller. After repeated experiments and theory, the surface used will be the femoral Groove, the veneer is not easy to wound rollers, increasing production efficiency. After mechanical testing, reasonable allocation of power, for users to save unnecessary power waste, save production costs. Drive a reasonable accurate alignment to ensure continuity and reliability of work.
2. tipping material without iron, stones and other debris;
3. wood debarker work, adjust material feed quantity, too much prone to overload stops, effect too little Hay cutter cutting effectiveness;
4. wood debarker work, such as blocking, no force feeding by hand or with iron bars, should be immediately shut down to clear;
5. wood debarker work, such as unusual or abnormal sound heard immediately shut down to check, you must cut off the power supply before checking, troubleshooting when the machine is prohibited;
6. various parts of activity daily butter is filling, main bearing using a 300-hour notation requires a lithium grease with butter;
7. timber Barker when you stop working, you should let the machine idle for two minutes, blowing off dust, weeds, and then shut down.
Label：debarker
