Band saw machine for woodworking machinery

1, saw blades should be adjusted appropriate test run first regular series of dangerous only when open cut. Saw blade teeth side crack over the saw blade width 1/6, the joints crack 1/8, over three consecutive missing teeth two and joints are not allowed to use. The crack should be drilling cut seam. ????Sports car before, logs should be adjusted the size of the head. Saw old material should be detailed inspection, remove nails and other objects. ????3, logs must be close to the undercarriage of the car pile hook is off the hook are not allowed to loose crowbar. Operation, the hands and feet are not allowed out of the sports car edge to prevent collision. ????4, non-operating personnel may not be on the bus, the sports car is not parked prohibited under wood. ????Into saws should be accurate Shake feet into saws shall not change the size. Into the saw speed should not be excessive, non-adjustment in the operation saw clamp and clean up scrap, such as bark. ????6, parking should not be too fast, and pay attention to check the barriers to exclude berm Croucher, knots, the end of the wood over the saw blade 50 cm, again reversing to prevent top off the saw blade. ????, Operating a small band saw on the start to cooperate with each other, do not shove tug. Hand feeding should enter countertops, hand pick materials should not exceed the kerf. Sawed material, application push stick to feed.

Drum Chipper
Disk Chipper
ZLX1000 WOOD CHIPPER
ZLX650 WOOD CHIPPER